How to configure Asterisk for LIPZ4 1.3.11

Asterisk configuration

In this sample configuration, 192.168.0.1 represents the Asterisk server and 192.168.0.2 is the client running the free LIPZ4 softphone client.

Configure Asterisk to accept registration and inbound calls in sip.conf like this:


 [zultys]
 type=friend
 host=dynamic
 secret=blahblahblah

Important:
The free version of LIPZ4 does not support setting the authentication password from the UI, but if
you enter it directly to /usr/local/zultys/mp4_flash.cfg file (AUTH_PASSWORD=secret), it will use it for authentication.


The LIPZ4 configuration is rather awkward, so you should follow closely the instructions in the downloadable PDF quickstart guide (or you can set it up directly through its config file).
The following parameters have to be set.

  Outbound proxy: 192.168.0.1
  Registrar Server: 192.168.0.1
  Device ID: zultys
  Domain: 192.168.0.2

After setting the parameters LIPZ4 should restart, and Asterisk's console should display:

  Registered SIP 'zultys' at 192.168.0.2 port 5060 expires 3600

Now you should be able to use the LIPZ4 soft phone.

If, after installation, the the LIPZ4 application does not start, add the following line to /usr/local/zultys/softphone:

  export LD_LIBRARY_PATH=/usr/local/zultys/kylix3/bin

Tóth István, 2004-03-13

See Also

• Asterisk sip channels
• Zultys phones

---

Asterisk | Asterisk Configuration | Channel Configuration | Configuration for Specific Phones